8661 Precision torque sensor: burster.de (2024)

Measuring ranges from 0 ... 0.02 N·m up to 0 ... 1000 N·m, low linearity deviation of≤ ±0.05 % F.S., intelligent operating state display, output signal 0 ... ±10 V (optional 0 ...±5 V or USB), speed and angle measurement with resolution of up to 2000 increments (option), excellent price performance ratio

• Features

  • Measuring range from 0 ...0.02 N·m to 0 ... ± 1000 N·m
  • Low linearity deviation of ≤ ± 0.05 % F.S.
  • Intelligent operating state indicator
  • 16 bit D/A converter including digital adjustment
  • Output signal 0 ... ±10 V (optional 0 ...± 5 V or USB)
  • Speed and angle measurement with resolution of up to 2000 increments (option)
  • Excellent price-performance ratio

• Product data

  Model	8661
  Principle	Rotating
  Measuring range	0 … ± 0.02 N·m 0 … ± 0.02 N·m 0 … ± 0.1 N·m 0 … ± 0.2 N·m 0 … ± 0.5 N·m 0 … ± 1 N·m 0 … ± 2 N·m 0 … ± 5 N·m 0 … ± 10 N·m 0 … ± 20 N·m 0 … ± 50 N·m 0 … ± 100 N·m 0 … ± 200 N·m 0 … ± 500 N·m 0 … ± 1000 N·m
  Signal output	0 ... ±10 V USB 0 ... ±5 V
  Ratio	No dual-range 1:10 1:5 1:4
  Mechanical connection	Round shaft Keyway
  Electrical connection	12 pins plug connection USB
  Integrated speed measurement	Option (TTL output signal with 400 or 1024 increments)
  Integrated angle measurement	Option (TTL output signal with 400 or 1024 increments; angle resolution 0.225° or 0.09° with four-edge decoding)
  Increments on encoder disk	No encoder disk 240 400 1024 2000
  Multiple range	Ratio 1:4, 1:5; 1:10 for measuring range 0 … 5 N·m
  Protection class	IP40
  Range of operating temperature	0... +60 °C
  Max. rotary speed	Depending on measuring range 7 000 - 25 000 1/min
  Signal transmission	non-contact
  Specific characteristics	Low linearity deviation of ≤ ± 0.05 % F.S. Intelligent operating state indicator Speed and angle measurement with resolution of up to 2000 increments (option) High performance software (option USB) including mechanical power computation, multichannel operation, freely editable mathematical auxiliary channel Excellent price-performance ratio

• Description

  The 8661 precision torque sensor is the ideal choice for reliable measurement of static and dynamic clockwise and counter-clockwise torques. Thanks to its high measurement quality and low linearity error, the sensor is equally at home in quality control or research & development. Designed for non-contact operation and zero-maintenance, the 8661 is also ideally suited to the production environment, whether on shift-based production lines, test benches or end-of-line test systems. The 8661 torque sensor is the specialist device for constant torque measurements during continuous operation and for test-bench measurements of holding, friction, break-away or tightening torques.

  An optional built-in incremental encoder disk with up to 2000 increments makes the sensor the perfect alternative where space or budget rule out an additional angle or speed sensor. For mobile use and for instant digital access to measurement data, the 8661 torque sensor is also available with a USB interface. A laptop or PC running the DigiVision PC software can read, visualize and archive the measurement data. System integration, for instance into LabView, is easy thanks to a driver package available free of charge.

  ► Test setups for precision mechanics
  ► Haptics testing of actuator elements
  ► Engine test benches and power measurement
  ► Biomechanical product testing
  ► Measurement of bearing friction torques
  ► Suitable for use in all types of test bench

  The 8661 torque sensor essentially consists of three blocks: the rotor, the housing (containing the stator) and the output electronics. The rotor is composed of several parts and contains the actual measuring device - a spring element. This spring element is designed to deform elastically under an applied torque. This results in torsion, which in turn pro-duces a very small amount of strain in the material of the measuring element. Within certain limits, this strain is linear and proportional to the applied torque. It can be measured using strain gauges, which are connected in a Wheatstone bridge circuit. A microprocessor conditions the signal from the Wheatstone bridge and transfers it to the stator. The rotor is linked to the stator via two ball-bearings, and signal transfer is contactless. The stator contains the electronics needed to supply the rotor with the required operating voltage by inductive and contactless means. In the opposite direction, it receives the optically transmitted, digitized torque signal and routes this signal to the output electronics. Here it is converted into an analog 0…± 10 V output signal, which is output via the connector. Alternatively, the sensor is available with a USB port. The 8661 torque sensor can optionally be fitted with an incremental encoder disk for measuring the speed and angle. This disk has 2000 increments, allowing angular resolutions of up to 0.045° by means of four-edge decoding. Three LEDs indicate the sensor operating status for simple diagnostics. Speeds of up to 25,000 min^-1can be measured depending on the selected measurement range and optional incremental encoder disk.

• Data Sheet & Downloads

  Data sheet

  Brochure

  Operation manual

  Software

  Further info

  See Also

  8661 Precision torque sensor: burster.de

• Accessories

  8661-Z001

  DEEN

  8661-Z002

  DEEN

  8661-Z003

  DEEN

  8661-Z004

  DEEN

  Metal bellow coupling 8695

  DEEN

  Connecting cable 99539

  DEEN

  Connecting cable 99540

  DEEN

• Videos

  Please accept marketing-cookies to watch this video.

  Torque Sensors: Made in Germany - Made by burster

  
  

  Youtube channel

• Application Examples

  

  Determining the force distribution in flyovers

  miniature pressure transducer model 8230

  Detail

  

  Dual-range model for measuring start-up and continuous operation characteristics

  of geared motors

  Detail

  

  Measurement of mechanical values

  at a completely automated motor vehicle test bed

  Detail

  

  Measuring pressing forces in machine tools

  miniature ring load cell

  Detail

  

  Measuring the friction torque

  in greased ball bearings

  Detail

  

  Motor testing

  fast dynamic response, low torque, reliable measurement

  Detail

  

  Testing the operation

  of electric-bike drives

  Detail

  

  Torque measurements

  on an industrial fan

  Detail

  

  Torque measurements

  using a dual-range sensor in a test setup

  Detail

  

  Torque measurements

  on steering-drive components

  Detail

  

  Torque monitoring

  for screw connections in titanium dental implants

  Detail

  

  Torque/angle measurement

  on vehicle dashboard controls

  Detail

Product category :

• Torque Sensors
• Load Cells
• Displacement Sensors
• Mechanical and Electrical Calibration Solutions
• Ohmmeter for Automation

burster Inc.

Product category :

• Torque Sensors
• Load Cells
• Displacement Sensors
• Mechanical and Electrical Calibration Solutions
• Ohmmeter for Automation

Trade fairs

The Battery Show North America
07.10. - 10.10.24 - Michigan, North America

Absolute Gauge Technologies Inc.